Galaxy International

Hand Held, 4 Digits Large LCD Display, Measures and Provides output for 20mV / 100mV / 15V DC, Current output up to 24mA, 24V Loop Power, Resistance output and measurement and outputs for K, E, J, T, R, S, B, N & PT100 types of thermocouples and PT-100 temperature sensor.

This is used for calibrating long distance Infrared Thermometer, which are designed as handheld and fixed units.

Whether you’re using on-line or handheld infrared pyrometers, you need a high performance calibration standard to verify accuracy. Portable IR Calibrator provides a stable black body target for calibrating non-contact IR thermometers up to 500℃. The portable IR calibrator features a large temperature controlled blackbody target with a diameter of 2.25’’ (57mm), which offers a wide field of view area for optical variations in IR thermometers. With an emissivity of 0.95, the isothermal target can be controlled in set-point increments of 0.1°from 50℃ to 500℃.

For even higher precision, a contact calibration well is located directly behind the blackbody surface. Using an optional digital RTD thermometer and calibrated secondary probe, accuracies of ±0.1℃ can be achieved.

5 Digits, 0.05% Accuracy, Sources DC Current, Analogue Transducer & Loop Power and Measures DC Voltage, DC Current and Loop Power Supply. IP40 and 1m drop test.

Hand Held, 3-1/2 Digits, Battery Operated, 0 - 19.99 /24mA, -199.9mV to 199.9mV source and current & power measurment

Bench type, 230V AC 50Hz Operated, 0 - 199.99m/1.9999 / 19.999V & 0-199.99u/1.999m / 19.999mA Sourcing & Measuring

5 Digits LCD Display, 0.05% accuracy, provides output only for DC Voltage, Resistance, Thermocouples – R, S, K, E, J, T, N, B, A, C, D and Thermal Resistance RTD – PT-100, PT-200, PT-500, PT-1000, Cu-50.
The output temperature value and the corresponding temperature signal are displayed on the same screen. With Auto power-off, backlight, flashlight.

6 Digits, 0.2% Accuracy, Sources R, S, B, E, K, J, T, N types of thermocouples, PT-100, Cu-50, DC Voltage, DC Current, Resistance, Analogue Transducer, Frequency, Pulse Output and LOOP Power.

6 Digits, ±0.02% Accuracy, Sources and Measures DC Voltage, PT-100, Cu-50 Sensors and R, S, B, E, K, J, T & N types of Thermocouples.

6 Digits, 0.2% Accuracy, Sources and Measures DC Voltage, DC Current, Analogue Transducer and LOOP Power. Also measure Pressure with optional module.

A reliable, accurate, powerful mV mA Loop Calibrator with HART COMMUNICATOR  featuring high accuracy of 0.01%.

mV mA Calibrator for Measuring and Source of 100mV / 30V DC Voltage, 20mA DC Current and switching value measurements. Supports manual Step Output, Automatic Waveform Output, and allows for simultaneous display of Voltage (V), Current (mA), and percentage. Loop detection function, overload protection.

Measurement and Source for 100mV / 30V DC Voltage, 20mA DC Current and switching value measurements. Supports manual Step Output, Automatic Waveform Output, and allows for simultaneous display of Voltage (V), Current (mA), and percentage. Loop detection function, overload protection. Supports 8 thermocouple types (R, S, B, K, E, J, T, and N) for both measurement and output, Temperature in °C/°F.  Automatic and manual cold junction

The Metravi CAL-600H is a multifunction process calibrator designed for industrial automation and maintenance, acting as a signal generator, process calibrator, and digital multimeter in one device. It can measure and simulate a variety of signals including voltage (mVm cap V𝑚𝑉, Vcap V𝑉), current (mAm cap A𝑚𝐴), resistance, and frequency (Hzcap H z𝐻𝑧). It is also equipped to handle temperature calibration for various types of thermocouples (K, E, J, T, R, S, B, N) and PT-100 RTDs. 

The "Calibrator CAL ER" is a specific model of a Metravi CAL-ER Earth and Ground Tester Calibrator, a device used to calibrate instruments that measure earth resistance. It works by providing a precise and stable resistance value to verify the accuracy of ground resistance testers and other grounding measurement equipment. This ensures these instruments are reliable for safety purposes, and it is used by companies involved in electrical safety, construction, and maintenance. 

CEM SC-05 Sound Level Calibrator provides signals of 94dB and 114dB for Sound Calibration at 1kHz. Accurate and simple to use; it fits 1/2” diameter microphones.

Bench type with Rechargeable Battery & 20,000 counts, 4 1/2 digit LED display. Source for 0 – 199.99mV / 1.9999V /19.999V, 0 – 199.99μA / 1.9999mA/19.999mA, RTD/PT100 (-50, -30, 0, 30, 50, 100, 150, 200, 300, 400, 600) °C. Measure 0-199.99mV / 1.9999V / 19.999V, 0 – 199.99μA / 1.9999mA/19.999mA. With adjustable Coarse/Fine.

5 Digits 0.5% Accuarcy, Sources and Measures Resistance, PT-100 Sensor and Cu-50 Sensors

50,000 Counts, 0.2% Universal Calibrator for DC Voltage, Current, Resistance, Frequency, all thermocouples and thermo-resistance and for pressure

High-precision, multifunction, universal thermocouple & RTD calibrator for accurate sourcing & measurement. Supports 11 thermocouple types & 14 RTD/resistance types. Wide range of excitation current (0.05mA to 5mA) for RTD simulation. 2W/3W/4W connections, cold junction compensation, selectable °C/°F, fixed current calibration, Auto Step, Auto Ramp, Memory functions, Backlit dot matrix LCD.

5 Digits, Digital Multimeter combined with source for DC voltage, resistance, frequency, thermocouples, thermal resistance, and DC current. supply power to 24V circuits and meanwhile measure current; with built-in250 Ω HART loop resistance

Hand Held, 4-1/2 Digits, Battery Operated, 0 - 199.9mV/0 - 19.999mA sourcing and measuring range

Bench type RTD Calibrator, Outputs availble at -200, -100, -50, -25, 0, 25, 50, 100, 150, 200, 300, 400, 500, 600 °C

5 Digits LCD Display, 0.05% accuracy, The measured / output temperature value and the corresponding temperature signal are displayed on the same screen. measures - DC voltage, resistance, thermocouple, thermal resistance RTD, on/off. 2W / 3W / 4W measurements are available for OHM and RTD. output - DC voltage, resistance, thermocouple, thermal resistance RTD, H/L settings are available for OHM excitation current. Thermocouples - R, S, K, E, J, T, N, B, A, C, D and Thermal Resistance - PT-100, PT-200, PT-500, PT-1000, Cu-50

Calibrator for instant and reliable calibration of Non – Contact tachometers upto 199999 RPM.

4 & 5 digits Digital Multimeter and DC mV / Voltage / Frequency / Resistance / mA Calibrator and also provides output for all types of Thermocouples