Galaxy International

The Metravi AT500 high-voltage detector is a handy, wearable instrument, which reminds the electrical worker to pay attention to safety and avoid high voltage electric shock accidents.
When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level.

This instrument can also be used for line fault detection and electroscope. Works only for single-core cables. Will not work for shielded/armoured cables.

The Metravi Pro 20PV Solar MPPT Meter can effectively identify any abnormalities in solar panels by testing their Maximum Power, Peak Power Voltage, Peak Power Current, Open Circuit Voltage, and Short Circuit Current.

Featuring a large display and automatic measurement capabilities, this device conveniently displays all measurement results simultaneously.
The Metravi Pro 20PV Solar MPPT Meter’s portable design enables easy carrying, greatly enhancing the operational and maintenance efficiency for Photovoltaic and Solar Panel manufacturers, installers, and end users.

Features:

• Maximum Power Test (Pmax): 5～800W
• Peak Power Voltage (Vmp): 12～ 60V
• Peak Power Current (Imp): 0～35A
• Open Circuit Voltage (Voc): 12～60V
• Short Circuit Current (Isc): 0～35A
• Large screen and multiple result display: A single measurement that displays all essential test values can significantly enhance work efficiency.
• No batteries needed, powered by the solar panel: There is no requirement for batteries as the measurement can be effortlessly performed for extended periods.
• Equipped with MC4 test lead: With the MC4 connector already included, there is no need for additional solar panel connectors. This enables quick and efficient measurements to be performed effortlessly.
• Portable and convenient: With its portable and lightweight design, this meter provides operators with convenience and ease of use, making it an incredibly versatile and indispensable tool for a wide range of tasks.
• Certifications: CE, cETLus, RoHS

The Metravi ERT-1501 is an electronic, digital, earth resistance tester and a direct replacement or the conventional hand generator type tester for 0 – 10 / 100 / 1000Ω, and features 4 Terminals with a Testing Kit and Cables in a hard carrying case.

The device measures Earthing used in electrical equipment as well as Ground Resistivity. It can also be used for measurements of the other low regular and liquid resistances, as well as AC Voltage, DC Voltage and Resistance.

The tester finds wide application for testing earthing installations in industries like Power, Telecommunications and Electrical Traction Systems.

Rechargeable battery option is available at extra cost.

The Metravi CET series Clamp-on Ground Resistance Testers feature:

• Self-test facility. No need to wait a long time to boot. Ready to use immediately after being switched on.
• Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology, fully intelligent.
• Handheld device, easy to carry. New design, panel operation with 6 buttons, better performance. Loud sound and light alarms; “beep—beep–beep –” alarm sound.
• Improved interference signal recognition indicator. Improved anti-jamming capability and test stability. Data storage: 99 Units. Wider range: 0.01Ω-200Ω.
• Lower power consumption: Maximum operating current does not exceed 50mA. Are widely used for grounding resistance measurement in power, telecommunications, meteorology, oil fields, construction industries and electrical equipments.
• In the measurement of a grounding system with loop current, it does not require breaking down the grounding wire and needs no auxiliary electrode.
• Safe, fast and simple to use.
• Can measure ground faults beyond the reach of traditional methods and can be applied in situations not in the range of traditional methods.
• Can measure integrated value of the grounding body resistance and the grounding lead resistance.

TRMS AC Leakage Current Clamp Meter 6000 Counts, Auto-Backlit LCD Display, Auto Power Off, as per IEC 61557-13: Class 2, 40mm Jaw Dia, IEC / EN 61010-1, IEC / EN 61010-2-032, CAT. III 600V, Pollution Degree 2, EN 61326-1 EN 61326-2-2, bandwidth up to 1kHz, 1% accuracy, 0 – 6mA / 60mA / 600mA / 6A / 60A, With resolution of 1uA, Bluetooth connection to connect it to freely available APP for recording data.

The Metravi Pro Uniks Skill Clamp Meter has the ability to AUTOMATICALLY recognise whether to carry out AC/DC TRMS Current or AC/DC TRMS Voltage or Resistance/Continuity measurements, all in the AUTO RANGE - in AUTO AC/DC and it comes with a CAT IV 600V certification. The Pro Uniks Skill lets you choose to display TWO real time measurements at the same time from the below combinations: Current/Voltage Current/Resistance Current/Continuity Current/Hz or Voltage/Hz.

3-3/4 digits, lcd, data hold, 30mm jaw size, t-rms, ac/dc voltage, ac/dc current up to 1000a, resistance, capacitance, temperature, frequency; diode; continuity test. All sales are final. No returns accepted. Replacements will be done only in case of the wrong item shipped or any manufacturing defect reported which (should be replicated at our end on receiving the product back).

Metravi dt-425t is a handheld auto-ranging clamp meter having 4,000 counts 3 3/4 digit backlit lcd display. The circuit design of the instrument uses the large scale integrated circuit s/d analogue digital converter as the core, with the full-range over-load protection circuit and unique appearance design, makes it a dedicated must-have instrument. It is used to measure ac/dc voltage, ac current, dc current, resistance, diode, circuit on-off, capacitance, temperature, frequency and duty cycle, and it is also equipped with functions as data-hold, maximum/minimum data measurement, relative value measurement, flashlight, ncv, under voltage display and auto off.

The Metravi DT-8250 & DT-9250 are Digital AC/DC clamp meters with big jaw dia which can be used anywhere that high current and voltage measurements are needed. DT-9250 is a T-RMS AC/DC Clamp Meter. The unique feature of the DT-8250 & DT-9250 is that they can measure Frequency through the Clamp Jaw, so they can measure frequency at high current as well. It becomes very safe to take frequency measurements as you do not need to need to touch high current lines with probes to get frequency measurements. They can also measure high frequency through the terminals.

Meco Auto / Manual Ranging Digital Clampmeters
Key Features :

True RMS 

Auto/ Manual 

6000 Counts LCD Display with Backlight

Auto Power Off

Capacitance, Frequency, Duty Cycle & Temperature Ranges

Low Battery Indications

200 Hrs Battery Life

Measuring Category : CAT IV 600 V

Clamp meters are electrical test instruments utilised for measuring current without connection to a circuit in series. They can easily be used and operated to measure live conductors without causing damage or loss of power. In short, they are devices used for safe and convenient current measurement

The Kyoritsu 2056R digital clamp-meter is a true RMS sensing, auto-ranging multimeter for measuring current, voltage, capacitance, frequency, and resistance in electrical testing applications.

The Fluke 302+ is a compact, easy-to-use digital clamp meter made to fit the way you work. It is the perfect first-pass troubleshooting tool: small enough to fit in a work bag, tough enough to withstand daily use, and extremely simple to use. All without compromising safety. For everyday applications, where True-RMS accuracy isn’t needed, the Fluke 302+ delivers reliable measurements time after time.

METRAVI-PRO 419 is the most complete AC T-RMS / DC clamp meter with data hold, backlit LCD Display, Built-in Flash light to measure in dark areas and Non contact Voltage Detector The instrument confirms to CAT-IV 600V, CAT-III 1000V, CE, IEC-61010-1. It has 35mm Clamp Jaw Dia. With Max / Min / Data Hold facility, the clamp meter is complete on-the-go measuring instrument.

The Metravi PRO Solar-3 is a professional T-RMS Industrial Clamp Meter with TFT Colour Display, featuring fast A/D Converter and high accuracy. Makes it easy to find and solve problems in production equipment with Trend Capture and helps with Bluetooth data transfer & analysis reports using free App on your Smartphone. Ensures safe measurements with double-moulded plastic housing, IP65 waterproof certification, CATIV 600V, CATIII 1000V & CATII 1500V categorisation. Measures upto 1500V DC measurement, and hence, is most suitable for Solar and Photovoltaic Applications. In-rush current, VFD and Loz measurement functions make it a must for all Motor Applications too. 

The PRO 2010 TRMS AC/DC Leakage Current Clamp Meter features high reliability, safety, precision and compact design with 0.1mA resolution in both AC & DC Currents.

It is the perfect instrument for diagnostics and maintenance in areas with low current measurement requirements. It measures both AC and DC current with a very stable 0.01 mA resolution. The backlit LCD display and bright LED flashlight make it easier to work in dimly lit locations.

The PRO 2010 is the ideal choice not only in general industrial applications, but also in utility, automotive and marine applications to measure standby or leakage currents in the mA range right up to 20A AC. The narrow jaw, angled for better manoeuvrability makes it easy to select the right wire in confined spaces. Auto power-off will save your battery when you forget to switch off.

The PRO 2010 is a well made and truly versatile hi-resolution clamp-meter for a wide range of users. With reliable measurement accuracy and the unique design makes it an outstanding new generation electrician/electric power measurement instrument

The Metravi Pro 474 AC/DC Industrial Clamp Meter features 6000 Counts TFT LCD Color Display, Digital TRMS Multimeter, AC/DC Voltage, AC+DC Voltage,  AC/DC Current, Bluetooth interface for PC/Smartphone connection, 100kHz Bandwidth, Trend Capture with zoom in function, Low Pass Filter, MAX / MIN / AVG, PEAK MAX / PEAK MIN, Relative Function and Data Hold Facility, Data Logging, Histogram Data, Real-Time Data Recoding, Auto Power Off, Full Overload Protection, Capacitance, Frequency up to 10MHz, Resistance, Temperature, Duty Cycle.

The Metravi PRO Solar-2A is a professional T-RMS Industrial Clamp Meter which measures upto 1500V DC and 1000V AC, making it ideal for high voltage applications, including Solar, Photovoltaic, EV, Power, Motor, etc. applications. 

METRAVI-PRO 419 is the most complete AC T-RMS / DC clamp meter with data hold, backlit LCD Display, Built-in Flash light to measure in dark areas and Non contact Voltage Detector The instrument confirms to CAT-IV 600V, CAT-III 1000V, CE, IEC-61010-1. It has 35mm Clamp Jaw Dia. With Max / Min / Data Hold facility, the clamp meter is complete on-the-go measuring instrument.

The Metravi PRO Solar-3 is a professional T-RMS Industrial Clamp Meter with a TFT Color Display, featuring a fast A/D Converter and high accuracy. Makes it easy to find and solve problems in production equipment with Trend Capture and helps with Bluetooth data transfer & analysis reports using a free App on your Smartphone. Ensures safe measurements with double-molded plastic housing, IP65 waterproof certification, CATIV 600V, CATIII 1000V & CATII 1500V categorization.

A digital AC/DC clamp meter is a versatile electrical test tool that combines a basic digital multimeter with a current sensor. Its primary function is to measure current in a conductor safely and conveniently by clamping a hinged jaw around a live wire, without the need to disconnect the circuit or make physical contact with it.

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC/DC clamp meter is a versatile electrical test tool that combines a basic digital multimeter with a current sensor. Its primary function is to measure current in a conductor safely and conveniently by clamping a hinged jaw around a live wire, without the need to disconnect the circuit or make physical contact with it.

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC/DC clamp meter is a versatile electrical test tool that combines a basic digital multimeter with a current sensor. Its primary function is to measure current in a conductor safely and conveniently by clamping a hinged jaw around a live wire, without the need to disconnect the circuit or make physical contact with it.

A digital AC clamp meter is an electrical test tool that safely measures alternating current (AC) in a conductor without the need to disconnect the circuit, by using a hinged jaw to clamp around the wire. It typically combines the functionality of a clamp meter and a basic digital multimeter, offering additional measurements like voltage and resistance

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC clamp meter is a versatile electrical test tool used to safely and non-intrusively measure alternating current (AC) in a conductor without breaking the circuit. It works by detecting the magnetic field produced by the current flowing through a wire using its hinged jaws

A digital AC/DC clamp meter is a versatile electrical test tool that combines a basic digital multimeter with a current sensor. Its primary function is to measure current in a conductor safely and conveniently by clamping a hinged jaw around a live wire, without the need to disconnect the circuit or make physical contact with it.

A digital AC/DC clamp meter is a versatile electrical test tool that combines a basic digital multimeter with a current sensor. Its primary function is to measure current in a conductor safely and conveniently by clamping a hinged jaw around a live wire, without the need to disconnect the circuit or make physical contact with it.

A digital AC/DC clamp meter is a versatile electrical test tool that combines a basic digital multimeter with a current sensor. Its primary function is to measure current in a conductor safely and conveniently by clamping a hinged jaw around a live wire, without the need to disconnect the circuit or make physical contact with it.

A digital AC/DC clamp meter is a versatile electrical test instrument that combines a basic multimeter with a current sensor (a hinged jaw) to safely and conveniently measure various electrical parameters, primarily AC and DC current, without disconnecting the circuit. 

A digital AC/DC clamp meter is a versatile electrical test instrument that combines a basic multimeter with a current sensor (a hinged jaw) to safely and conveniently measure various electrical parameters, primarily AC and DC current, without disconnecting the circuit.