Galaxy International

The Metravi 19-TRMS Digital TRMS Multimeter  is a 3 3/4 digital multimeter with high stability and performance.

It uses an LCD with 20mm high figure, which makes the reading clearer and the operation more convenient. It can test DCV, ACV, DCA, ACA, resistance, capacitance, frequency, NCV, duty cycle, temperature, diode, and continuity.

This meter is also designed with functions including unit symbol display, data hold, lighting, auto range, auto power off and warning functions. To assure high accuracy and resolution, it adopts integrated circuit 8-bit microprocessor and a dual integral A/D conversion as LCD driver, giving high resolution and high accuracy.

It is an ideal tool for labs, factories and radio-technology. The instrument is designed in compliance with IEC1010 standards.

• T-RMS Measurement
• Data Hold to Freeze the displayed data
• Auto Power Off
• Double Moulded Body
• Display: 22000 Counts LCD, with analog bar graph
• DC Voltage: 0 – 220mV/2.2V/22V/220V/1000V
• Accuracy: ± (0.1%+2)
• AC Voltage: 0 – 220mV/2.2V/22V/220V/750V T-RMS
• Accuracy: ± (0.8%+10)
• DC Current: 0 – 220uA/2200uA/22mA/220mA/10A
• Accuracy: ± (0.5%+10)
• AC Current: 0 – 220uA/2200mA/22mA/220mA/10A T-RMS
• Accuracy: ± (0.8%+10)
• Resistance: 0 – 220Ω/2.KΩ/202Ω/202KΩ/2.2MΩ/22MΩ/220MΩ
• Accuracy: ±(0.5%+10)
• Capacitance: 0- 22nF/220nF/2.2uF/22uF/220uF/2.2mF/22mF/220mF
• Accuracy: ±(3.0%+5)
• Frequency: 10 ~ 220MHz
• Accuracy: ± (0.01%+5)
• Duty Cycle: 0 – 99.9%
• Accuracy: ± 0.1%
• Diode Test, Audible Continuity Test

• Fully Protected DMM
• 1200V DC/AC RMS Protection in Voltage Ranges
• 20A DC/AC RMS Protection in Ampere Ranges
• 600V DC/AC RMS Protection in Resistance, Capacitance, Frequency, Temperature, Continuity and Diode Test Ranges
• Surge Protection of 8kV Peak IEC61010
• “O” Ring Seal Body
• T-RMS measurement, Peak Hold, Relative Measuring
• MAX / MIN Recording,
• Auto Power Off
• Display: 3-¾ Digits 4000 Counts Backlit LCD with Analog Bargraph
• DC Voltage: 0 – 400mV/4V/40V/400V/1000V
• Accuracy: ± 0.5%
• AC Voltage: 0 – 400mV/4V/40V/400V/1000V T-RMS
• Accuracy: ± 0.8%
• DC Current: 0 – 400uA/4000uA/40mA/400mA/20A
• Accuracy: ± 1.2%
• AC Current: 0 – 400uA/4000uA/40mA/400mA/20A T-RMS
• Accuracy: ± 1.5%
• Capacitance: 0 – 4nF/40nF/400nF/4uF/40uF/400uF/4mF/40mF
• Accuracy: ± 3%
• Frequency: 0 – 4kHz/40KHz/400KHz/40MHz
• Accuracy: ± 1.2%
• Temperature:  -20°C to +760°C  /  -4°F to +1400°F
• Accuracy: ± 3%
• Diode Test and Audible Continuity Test
• Confirms to CAT-III 1000V, CAT-IV 600V, EN61010-1, CE

Handheld, Waterproof and Dust-proof Digital Multimeter.

Anything and Everything that you can possibly think about. A must for all technicians.

Double- moulded injection body, built-in flashlight to access dark areas, T-RMS function to measure any kind of signal irrespective of the waveform, Lo-Z measurement to measure ghost voltage. Bluetooth interface for connection to mobile phone for remote display and for recording data.

These are just a few things to enumerate for this next-gen DMM.

The Metravi PRO Solar-1A is a versatile hand-held, Auto-Ranging Multimeter, providing T-RMS measurements, therefore being useful for all kinds of applications. The instrument measures AC/DC Voltage, AC/DC Current, Resistance, Low Voltage and Power Frequencies, Capacitance, Temperature, Diode Test and Audible Continuity Test. The back-lit, large, LCD Display with 6000 Counts not only gives it an advantage to use in poorly-lit areas, it also enables high resolution readings for larger ranges.

The 1500V DC measuring range makes it useful for Solar Applications specifically. The IP67 protection helps in protecting the instrument during outdoor applications and makes it water and dust proof. The VFD function, makes it useful for measurements in variable frequency drives. A click of a button helps you toggle between measured voltage and frequency & measured current and frequency.

The Metravi Solar-1B Digital T-RMS Multimeter is a high-performance, battery driven, and highly reliable instrument. It adopts a large, backlit LCD display with clear readings and an overload protection function.

It can measure 2000V AC/ DC Voltage, DC Voltage, True RMS AC Voltage and Average values, DC Current, AC Current, Resistance, Capacitance, Frequency, Diode and Temperature. It features intelligent voice alarm values and high voltage diode output measurement.
Compared to traditional diode measurement, the Metravi Solar- 1B provides a voltage of 1V higher, making it more convenient for maintenance personnel to measure various LEDs.

The entire device is equipped with dual integral A/D transformed into the core and it is a high-performance tool and instrument. It’s an ideal tool for laboratories, factories and radio enthusiasts.

The Metravi XB-33CF Digital TRMS Multimeter is a pocket-sized 3 5/6-digits, 6000 counts, auto-ranging multimeter. It has stable performance, high precision, high reliability, clear reading, with overload protection and is a best seller.

With AAA 1.5V battery the Metravi XB-33CF Digital TRMS Multimeter uses a large-screen LCD display, boost power supply, even in the 2.3V low battery, it can guarantee high backlight brightness, the meter is easy to carry, has a vast number of usages, the backlight can be automatically turned off after 15 seconds.

The Metravi XB-33CF Digital TRMS Multimeter instrument can be used to measure DC voltage, AC voltage, DC current, AC current, Resistance, Capacitance, Temperature, Frequency, Diode, Continuity Test, Non Contact Voltage detection, true RMS measurement and other parameters.

It is an ideal tool for the laboratory, factory, radio enthusiasts and families.

The Metravi XB-33A is a 6000 Counts, Auto-ranging TRMS Digital Multimeter, with a backlit LCD display. In case if you don’t know whether two points are short, or have voltage or linear resistance, no need to worry. Just connect this multimeter and the instrument will detect automatically.

This auto-ranging digital multimeter can measure AC TRMS Voltage and Current, DC Current / Voltage, Frequency, Resistance, Capacitance & Temperature. It also has Diode and Continuity Test and Non-contact Voltage Detection, along with overload protection to against incorrect connections. 

• Display: 1999 (3 ½) Count , 15mm Backlit LCD
• Auto Power Off
• Over Load Protection of 500V DC/AC RMS
• DC Voltage: 0-200mV/2V/20V/200V/600V
• Accuracy: ±0.5%
• AC Voltage: 0-200V/600V
• Accuracy: ±1.2%
• DC Current: 0-2000µA/20mA/200mA/10A
• Accuracy: ±1.0%
• Resistance: 0-200/2K/20K/200K/2M.ohms
• Accuracy: ±1.0%
• Battery Test: 9V/1.5V
• With Diode Test, Continuity  Test and Data Hold.
• Confirms to CE, CAT-III 600V, IEC 1010-1

The Metravi HT500 Non-contact Voltage Detector reminds the electrical worker to pay attention to safety and avoid high voltage electric shock accidents. When the operator is wearing the alarm and gets close to a high voltage charged body within a certain distance, sound and light alarms go off, according to the safety distance of the corresponding voltage level. This instrument can also be used for line fault detection and electroscope.

FEATURES:
• Provides a safe, practical, convenient, new style high voltage alarm device for high voltage approach electric operator. It is especially  suitable for sites having overhead high voltage lines.
• The alarm is to be worn on the helmet of the operator, and the alarm rsymbol should be pointing towards the direction of the fingertips.
• Adopts non-contact induction technology, accurate alarms, is power saving and durable with standby time up to 12 months.
• Features all-directional induction voltage power source, automatic trigger-detection mode with sound and light alarms, to ensure safety of approach for high voltage electricity workers.

The Metravi 55-TRMS is a 2,00,000 counts Bench-top Digital Multimeter with high precision, multi-function and fully automatic functions of Mathematical Operations, Capacitance, Temperature and other basic measurements.

The 55-TRMS comes with 4.3-inch 480×272 TFT display, supports LAN, USB, RS-232C and GPIB (optional) operations, which makes it a great laboratory instrument and a precise measurement tool for automated test systems.

APPLICATIONS:

• Research and Education
• Research and Development
• Detection and Maintenance
• Calibration
• Automated Testing

The Metravi ERT-1635 Double Clamp Multi-function Earth and Grounding Resistance Tester is specially designed and manufactured for on-site measurement of grounding resistance, soil resistivity, grounding voltage, grounding line leakage current, AC current and DC resistance. Applying digital processing technology, it offers precision 4-wire method, 3-wire method and simple 2-wire method, selection method, double-clamp method to measure grounding resistance.

The large caliber clamp design can measure the grounding system using large grounding down lead and can flexibly and accurately measure any grounding resistance value of various complex grounding conditions such as single point and mesh grounding. It is not required to disconnect any parallel grounding pole to do the measurements. Import FFT (Fast Fourier Transform) technology, AFC (Automatic Frequency Control) technology, with unique anti-interference ability and environmental adaptability, high repeated test consistency, ensures high precision, high stability and high reliability for long-term measurements.

Widely used in power, telecommunications, meteorology, oil fields, construction, lightning protection and industrial electrical equipment, such as grounding resistance, soil resistivity, grounding voltage, alternating current, leakage current measurement.

The Metravi CET series Clamp-on Ground Resistance Testers feature:

• Self-test facility. No need to wait a long time to boot. Ready to use immediately after being switched on.
• Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology, fully intelligent.
• Handheld device, easy to carry. New design, panel operation with 6 buttons, better performance. Loud sound and light alarms; “beep—beep–beep –” alarm sound.
• Improved interference signal recognition indicator. Improved anti-jamming capability and test stability. Data storage: 99 Units. Wider range: 0.01Ω-200Ω.
• Lower power consumption: Maximum operating current does not exceed 50mA. Are widely used for grounding resistance measurement in power, telecommunications, meteorology, oil fields, construction industries and electrical equipments.
• In the measurement of a grounding system with loop current, it does not require breaking down the grounding wire and needs no auxiliary electrode.
• Safe, fast and simple to use.
• Can measure ground faults beyond the reach of traditional methods and can be applied in situations not in the range of traditional methods.
• Can measure integrated value of the grounding body resistance and the grounding lead resistance.

The Metravi PRO 589 is a professional, True RMS, Industrial, Digital Multimeter with TFT colour LCD display, providing fast A/D converting sampling time, high accuracy, built-in data-logging and Trend Capture features.

It can trace any interrupted problems of the equipment and watch on without person and makes it easier to find and solve the problems of the production equipment, providing Bluetooth technology and data memory.

It provides much more safer measurements.

This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic), Duty Cycle, Diode Test, Insulation Test, and Continuity plus Thermocouple Temperature. It can store and recall data. It features a waterproof, rugged design for heavy duty use.

Proper use and care of this meter will provide many years of reliable service.

A dynamic hand-held device, the multimeter which allows users to save time and tool belt space.With 6000 counts, the multimeter features a backlit LCD display with data review and measurement saving functions.

• Effectively capture voltage and frequency measurements
• Troubleshoot industrial problems
• Auto-ranging & T-RMS
• Low pass filter(VFD) function
• CATIV 600V
• MAX/MIN, Relative & Data Hold
• Type K temperature measurement
• 6000 counts Backlit LCD Display

Handheld, Waterproof and Dust-proof Digital Multimeter. Anything and Everything that you can possibly think about. A must for all technicians, double- moulded injection body, built-in flashlight to access dark areas, T-RMS function (PRO-12B) to measure any kind of signal irrespective of the waveform, Lo-Z (PRO-12B) measurement to measure ghost voltage. Bluetooth interface for connection to mobile phone for remote display and for recording data (PRO-12B). These are just a few things to enumerate for this next-gen DMM.

APP available on Appstore and Google Play Store for remote access of Multimeter and to store Data (Only in PRO-12B).

A Digital Multimeter serves as the perfect instrument for detecting voltage quickly and also comes in handy during installations and troubleshooting for combiner box and inverter.

An industrial-strength, T-RMS Multimeter with a broad operating temperature range, is a must to have.  High accuracy, range of measurements, ability to withstand drops and a dust proof & waterproof case are features to look for to help in protecting the instrument during outdoor applications.

Handheld, Waterproof and Dust-proof Digital Multimeter. Anything and Everything that you can possibly think about. A must for all technicians, double- moulded injection body, built-in flashlight to access dark areas, T-RMS function (PRO-12B) to measure any kind of signal irrespective of the waveform, Lo-Z (PRO-12B) measurement to measure ghost voltage. Bluetooth interface for connection to mobile phone for remote display and for recording data (PRO-12B). These are just a few things to enumerate for this next-gen DMM.

APP available on Appstore and Google Play Store for remote access of Multimeter and to store Data (Only in PRO-12B).

The Metravi PRO 589 is a professional, True RMS, Industrial, Digital Multimeter with TFT colour LCD display, providing fast A/D converting sampling time, high accuracy, built-in data-logging and Trend Capture features.

It can trace any interrupted problems of the equipment and watch on without person and makes it easier to find and solve the problems of the production equipment, providing Bluetooth technology and data memory.

It provides much more safer measurements.

This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic), Duty Cycle, Diode Test, Insulation Test, and Continuity plus Thermocouple Temperature. It can store and recall data. It features a waterproof, rugged design for heavy duty use.

Proper use and care of this meter will provide many years of reliable service.

The Metravi 6030A+ Digital Multimeter is a 6000 Counts T-RMS Multimeter with a large, backlit LCD display.
It replaces the popular 6030A and is upgraded with better looks, wider ranges and higher specifications!

It has a large Capacitance measurement range up to 100mF with fast response time of less than 12S. Both the Non-contact Voltage Detection and Continuity have alarm as well as visual indication.
It has LIVE function to detect live and neutral lines and is equipped with automatic fast-blown fuse detection and high voltage detection. 

The Metravi PRO 21 Digital TRMS Multimeter with VFD is a dynamic hand-held device, a multimeter which allows users to save time and tool belt space.

Heavy Duty Industrial-grade Digital Multimeter with VFD Measurement. IP67 dust and water proof, as well as 2 metres drop/shock-proof. With 6000 counts, the multimeter features a backlit LCD display with data review and measurement saving functions.

The Metravi PRO 21 Digital TRMS Multimeter with VFD features a 6000 counts backlit LCD display, TRMS, Auto-ranging Professional Multimeter for measuring AC/DC Current, AC/DC Voltage,  Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Continuity and Diode testing. AC Measurement Bandwidth 1kHz.

Features Relative Measurement, MAX MIN records, Auto Power-off, Low Battery indication, fast-blow Ceramic Fuse. CE Certified, CAT-III 1000V, CAT-IV 600V.

The Metravi Pro 7 is a first of its kind multimeter with backlit ranges and range selection switch, which makes operations in dark environments easy with the backlit display, backlit switch as well as the backlit ranges clearly visible.

When one needs to access dark areas to make measurements, mostly all meters have backlit displays, where only there is light  on the display. In teh dark though, it is difficult to know where the selector switch is, as we cannot see clearly. The Metravi PRO 7 sorts this problem completely with a backlit display, backlit ranges, a backlit selector switch and a flashlight!

It measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode and Continuity Test. Can measure AC Voltage of VFD (Variable Frequency Drive).

Features Non-contact Voltage Detection, Live Line Test, Square Wave Output, Data Hold, MAX/MIN record functions. Auto Power Off.

Heavy-duty, rugged design with double-injection moulding. Built-in Flashlight to access dark areas. Confirms to CATIII 600V.

The Metravi PRO 587 is a professional, True-RMS, Industrial Digital Multimeter with a 6000 counts LCD display, which can be turned into 60000 Counts with just the press of a button! It features a waterproof, rugged design for heavy-duty use. Proper use and care of this meter will provide many years of reliable service.

6,000 /60,000 Counts user selectable, Backlit LCD Display, Analogue Bargraph, T-RMS Multimeter, 1000V AC/DC Current, 10A AC/DC Current, 100kHz AC Response, Resistance, Capacitance, Electrical and Electronic Frequency, Temperature, Duty Cycle, Low Pass Filter, 4-20mA measurement, Continuity and Diode testing.
Features Auto Power Off, Auto Hold, Min/Max, Peak Min/Max, Relative measurement.
Double-moulded, waterproof, 2 meter drop tested, CAT III 1000V, CAT IV 600V, UL-61010-1, UL-61010-2-032, UL-61010-2-033. Comes with Fast Blow Ceramic Fuse with easy fuse access.

Contact type, Light and Buzzer indication, detects presence of High Voltage in AC Lines, expandable from 1370mm to 2450mm, detects 3kV to 81.5kV AC.

The 290 HD detects high and extra high voltage in AC lines. Elongated insulation rods permit checking high-tension circuits from a safe working distance. The handy telescopic rods make these detectors compact, lightweight, and easy to use.