Galaxy International

The Metravi ERT-1501 is an electronic, digital, earth resistance tester and a direct replacement or the conventional hand generator type tester for 0 – 10 / 100 / 1000Ω, and features 4 Terminals with a Testing Kit and Cables in a hard carrying case.

The device measures Earthing used in electrical equipment as well as Ground Resistivity. It can also be used for measurements of the other low regular and liquid resistances, as well as AC Voltage, DC Voltage and Resistance.

The tester finds wide application for testing earthing installations in industries like Power, Telecommunications and Electrical Traction Systems.

Rechargeable battery option is available at extra cost.

The Metravi CET series Clamp-on Ground Resistance Testers feature:

• Self-test facility. No need to wait a long time to boot. Ready to use immediately after being switched on.
• Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology, fully intelligent.
• Handheld device, easy to carry. New design, panel operation with 6 buttons, better performance. Loud sound and light alarms; “beep—beep–beep –” alarm sound.
• Improved interference signal recognition indicator. Improved anti-jamming capability and test stability. Data storage: 99 Units. Wider range: 0.01Ω-1500Ω.
• Lower power consumption: Maximum operating current does not exceed 50mA. Are widely used for grounding resistance measurement in power, telecommunications, meteorology, oil fields, construction industries and electrical equipments.
• In the measurement of a grounding system with loop current, it does not require breaking down the grounding wire and needs no auxiliary electrode.
• Safe, fast and simple to use.
• Can measure ground faults beyond the reach of traditional methods and can be applied in situations not in the range of traditional methods.
• Can measure integrated value of the grounding body resistance and the grounding lead resistance.
• Equipped with long jaws (for some models). Long jaws are particularly suitable for testing grounding with flat steel.

The Metravi CET series Clamp-on Ground Resistance Testers feature:

• Self-test facility. No need to wait a long time to boot. Ready to use immediately after being switched on.
• Breakthrough relay self-test mode, using the most advanced processing algorithms and digital integration technology, fully intelligent.
• Handheld device, easy to carry. New design, panel operation with 6 buttons, better performance. Loud sound and light alarms; “beep—beep–beep –” alarm sound.
• Improved interference signal recognition indicator. Improved anti-jamming capability and test stability. Data storage: 99 Units. Wider range: 0.01Ω-200Ω.
• Lower power consumption: Maximum operating current does not exceed 50mA. Are widely used for grounding resistance measurement in power, telecommunications, meteorology, oil fields, construction industries and electrical equipments.
• In the measurement of a grounding system with loop current, it does not require breaking down the grounding wire and needs no auxiliary electrode.
• Safe, fast and simple to use.
• Can measure ground faults beyond the reach of traditional methods and can be applied in situations not in the range of traditional methods.
• Can measure integrated value of the grounding body resistance and the grounding lead resistance.
• Equipped with long jaws (for some models). Long jaws are particularly suitable for testing grounding with flat steel.

The Metravi CET-01B Clamp-on Ground Resistance Tester with Bluetooth is widely used in earth resistance measurement and loop resistance measurement in electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

When measuring the grounding system of the loop circuit, there is no need to disconnect the grounding down lead or auxiliary earth electrode, and it enables safe and fast testing.
The Metravi CET-01B Clamp-on Ground Resistance Tester with Bluetooth can measure ground faults that cannot be measured by traditional methods, and can be applied to the site which cannot be measured by traditional methods, as earth resistance tester measures the comprehensive value of the grounding body resistance and the grounding lead resistance.

Features:

• Avoids long self-test waiting after power-on, and enters the test interface immediately after power-on.
• No relay self-test and adopts advanced algorithms and digital integrated processing technology.
• No bulky problem of old products and is portable & handheld.
• New housing & design, six operation keys on the panel, easy to operate.
• Added sound and light alarm function, will have “”beep–beep– beep–“” alarm sound.
• Added interference signal identification and indication function, will have “”beep–beep–beep–“” prompt sound.
• Measurement range 0.01Ω-1500Ω.
• Stores 99 groups of data, has lower power consumption, maximum startup and operating current less than 50mA.
• Bluetooth enabled and Free App for data storage and analysis.

The Metravi CET-03B Clamp-on Earth and Ground Resistance Tester with Bluetooth is widely used in earth resistance measurement and loop resistance measurement in electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

When measuring the grounding system of the loop circuit, there is no need to disconnect the grounding down lead or auxiliary earth electrode, and it enables safe and fast testing.
The tester can measure ground faults that cannot be measured by traditional methods, and can be applied to the site which cannot be measured by traditional methods, as earth resistance tester measures the comprehensive value of the grounding body resistance and the grounding lead resistance.

The Metravi CET-03B Clamp-on Earth and Ground Resistance Tester with Bluetooth has a long jaw which is suitable for the site of flat steel grounding. It can also measure leakage current grounding system and the neutral current.

Features:

• Avoids long self-test waiting after power-on, and enters the test interface immediately after power-on.
• No relay self-test and adopts advanced algorithms and digital integrated processing technology.
• No bulky problem of old products and is portable & handheld.
• New housing & design, six operation keys on the panel, easy to operate.
• Added sound and light alarm function, will have “”beep–beep– beep–“” alarm sound.
• Added interference signal identification and indication function, will have “”beep–beep–beep–“” prompt sound.
• Measurement range 0.01Ω-1500Ω.
• Stores 99 groups of data, has lower power consumption, maximum startup and operating current less than 50mA.
• Bluetooth enabled and Free App for data storage and analysis.

The Metravi CET-05B Clamp-on Earth Resistance Tester is widely used in earth resistance measurement and loop resistance measurement in electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

When measuring the grounding system of the loop circuit, there is no need to disconnect the grounding down lead or auxiliary earth electrode, and it enables safe and fast testing.
The tester can measure ground faults that cannot be measured by traditional methods, and can be applied to the site which cannot be measured by traditional methods, as earth resistance tester measures the comprehensive value of the grounding body resistance and the grounding lead resistance.

Metravi CET-05B Clamp-on Earth Resistance Tester has a long jaw which is suitable for the site of flat steel grounding. It can also measure leakage current grounding system and the neutral current.

Features:

• Avoids long self-test waiting after power-on, and enters the test interface immediately after power-on.
• No relay self-test and adopts advanced algorithms and digital integrated processing technology.
• No bulky problem of old products and is portable & handheld.
• New housing & design, six operation keys on the panel, easy to operate.
• Added sound and light alarm function, will have “”beep–beep– beep–“” alarm sound.
• Added interference signal identification and indication function, will have “”beep–beep–beep–“” prompt sound.
• Measurement range 0.01Ω – 200Ω.
• Stores 99 groups of data, has lower power consumption, maximum startup and operating current less than 50mA.
• Bluetooth enabled and Free App for data storage and analysis.

The Metravi VIB-30 Plus Portable Vibration Meter is a micro-controller based meter that has been designed as a simple diagnostic tool for preventive maintenance.
It measures RMS velocity in the range of 0.1 to 199.9 mm/sec T-RMS & Peak. The instrument and the monitoring techniques are based on the recommendations of ISO standards.

Need based maintenance is most important for the modern industry, which helps keep low maintenance costs and optimised the life of the machinery. Condition monitoring is the basic need for maintenance.

All required, useful measurements are possible with the Metravi VIB-30 Plus Portable Vibration Meter. The Velocity mode allows the user to perform basic vibration analysis.

The Metravi CET-02B Clamp-on Earth Resistance Tester is widely used in earth resistance measurement and loop resistance measurement in electric power, telecommunications, meteorology, oil fields, construction and industrial electrical equipment.

When measuring the grounding system of the loop circuit, there is no need to disconnect the grounding down lead or auxiliary earth electrode, and it enables safe and fast testing.
The tester can measure ground faults that cannot be measured by traditional methods, and can be applied to the site which cannot be measured by traditional methods, as earth resistance tester measures the comprehensive value of the grounding body resistance and the grounding lead resistance.

Metravi CET-02B Clamp-on Earth Resistance Tester has a long jaw which is suitable for the site of flat steel grounding.

Features:

• Avoids long self-test waiting after power-on, and enters the test interface immediately after power-on.
• No relay self-test and adopts advanced algorithms and digital integrated processing technology.
• No bulky problem of old products and is portable & handheld.
• New housing & design, six operation keys on the panel, easy to operate.
• Added sound and light alarm function, will have “”beep–beep– beep–“” alarm sound.
• Added interference signal identification and indication function, will have “”beep–beep–beep–“” prompt sound.
• Measurement range 0.01Ω-1500Ω.
• Stores 99 groups of data, has lower power consumption, maximum startup and operating current less than 50mA.
• Bluetooth enabled and Free App for data storage and analysis.

The Metravi VT-141D Dual Channel Vibration Meter with Data Logger measures the vibrations of the rotating and reciprocating machines, as well as warns of bearing damage.

It measures Acceleration, Speed/Velocity, Displacement – the measured data indicates and checks if the machine is to be repaired or need an upgrade.

Features:

• Dual Channel Vibration meter
• Wide frequency range of 10Hz to 5KHz
• Measure Acceleration
• Measure Velocity
• Measure Displacement
• Vibration sensor with magnetic adapter on1.2M (47.2) cable
• Frequency Low range: 10Hz~1KHz meets ISO 2954-2012(10hz ~ 1khz. range) measurement
• Frequency Hi range: 10Hz~5KHz
• MAX record
• Auto power-off with disable function

The Metravi MM-10 Pin-less Moisture Meter is an electronic dampness indicator with a measuring process working on high frequency measurement principle.

It is used for non-destructive testing and tracing of moisture content in all kinds of building materials as well as damp distribution in walls, ceilings and floors. Particularly suitable for pre-testing the readiness of building materials for covering, prior to CM measurements.
Ideal for measuring moisture content in wood, gypsum and cement-based materials.

Digital Wood Moisture Meter that can measure moisture in up to 150 different kinds of wood.

This industrial-grade, wide range, digital wood moisture meter is a conductivity moisture instrument designed for use on wood.

With a measurement range of 6 – 99%, it is ideal for the lumber yard, furniture factory and hobby wood projects, where wood moisture monitoring is important.

This device is compact and very portable. It comes with a remote probe and a temperature probe. A heavy duty carrying pouch is also included for the protection of the device and for your convenience.

• Used to measure moisture content in Wood, Bamboo, Cotton, Tobacco, Paper, Foodstuffs etc
• Data Hold Facility
• Low Battery Indication
• Quick Response
• Display : 2 Digits Large LCD
• Range : 5% to 40%
• Resolution : 1%
• Accuracy : ±1%
• Built in electrodes

• Measures Coatings: Non-magnetic (e.g. paint, zinc) on steel; Insulated (e.g. paint, anodised coatings) on non-ferrous metals. Measuring Range: 0 ~ 2000μm.
• 2.4” TFT colour LCD display. 4 way auto-rotation screen: 0°, 90°, 180°, 270°. Set auto power-off time. 10 levels of adjustable LCD backlight brightness.