Galaxy International

• Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
• To support plug and play USB storage instrument to communicate with computer.
• Automatic waveform and status setup. Waveform, setup, bitmap storage, waveform and setup reoccurrence.
• Elaborate view window extension function for delicate analysis of waveform details and profile
• Automatic measurement of 28 kinds of waveform parameters
• Automatic cursor tracing and measurement function
• Unique waveform recording and playback functions
• Embedded FFT
• Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
• Edge, video, pulse width and ALT Trigger functions
• Multi-language menu display
• Bandwidth 200MHz
• Sampling Rage: 1GSA/Sec.
• Storage Depth: 25k
• Record Length: Sampling Point of 2 x 521k
• Vertical Deflection: 2mV/div~5V/div

• Increased auto-measure speed
• Improved UI – more user-friendly
• Optimised software – reduces operation wait time
• Fixed upper limit bandwidth distortion in multi-channel mode
• Sample rate up to 1GS/s
• Channels 4
• Bandwidth 100MHz
• Memory Depth 56Mpts (single channel)
• Waveform Capture Rate up to 80,000 wfms/s
• 256 multi-level intensity grading display
• Up to 65,000 frames for waveform record, replay
• Increased trigger types: Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code
• Support serial bus trigger and decoding (RS-232, I2C, SPI included)
• 8 inches, TFT LCD, WVGA (800 x 480)
• Interface: USB Host, USB Device, LAN, AUX (Trig Out, Pass/Fail)

• Bandwidth 250MHz
• Rise time 1.4ns
• Attenuation Ratio 100:1
• Input Resistance 100MW ±12%
• Input Capacitance 6pF
• Maximum Input 2KV
• Working Voltage (VP.P)
• Compensation Range 10pF~35pF
• Operation Environment 0~50°C, 0~80%
• RH Storage Environment -20~60°C, 0~90%RH

 OP-100 is a x 1 / x 10 attenuation modular probe designed to be used with 100MHz oscilloscopes with an input impedance of 1MΩ.

The probe consists of separate parts:

• BNC Male Connector and compensation box
• Probe body tip with R. C. assemblies
• Approx. 1.1m cable

The Metravi CT-9 Handheld Dual Channel VI Curve Tracer for Oscilloscopes is a specialised device that pairs with any oscilloscope to analyse the Voltage- Current (VI) characteristics of electrical components and circuits.

It adds the Component Testing function to any Analogue or Digital Oscilloscope and enables detailed diagnostics by plotting VI curves, which can reveal faults such as shorts, opens, or degraded components. Outputs signals that can be directly viewed on an oscilloscope’s XY mode, leveraging the oscilloscope’s display for high-resolution VI curve analysis.

It allows simultaneous comparison of two components or circuit paths, ideal for identifying faulty components against a known-good reference and generates low-frequency AC or DC signals, suitable for driving components to produce characteristic VI curves.

Lightweight design, it uses split type of flame retardant plastic shell, with a panel made of frosted PET environmental friendly material; for convenient use in fieldwork or laboratory environments.

Applications:

• Component Diagnostics
• PCB Troubleshooting
• Educational Use
• Maintenance and Repairs
• Quality Control

• Electronic circuits debugging
• Circuit testing
• Designing & Manufacturing
• Education & Training
• Automobile maintenance & designing

• Bandwidth 60MHz
• Rise Time 5.8ns
• Attenuation Ratio 1X&10X
• Input Resistance 1MW/10MW±2%
• Input Capacitance 1X:70pF~120pF, 10X:14~18pF
• Max. Input Voltage 1X:150V RMS CATII & 10X:300V RMS CAT II
• Compensation Range 15~45pF
• Operation Temperature -10°C~+55°C
• Humidity -40°C or below <90%, +41°C to +50°C ≤60%
• Altitude Operating 3000m Non-operating 15000m
• Cable Length 110±2cm
• Safety IEC61010-031

• Electronic circuits debugging
• Circuit testing
• Designing & Manufacturing
• Education & Training
• Automobile maintenance & designing

The Metravi OM-100 Handheld Oscilloscope is a compact and versatile Handheld Digital Oscillometer, designed to meet the demands of various electronic measurement and troubleshooting jobs.

With a bandwidth of 100MHz, it offers reliable and efficient solutions for measuring and analysing electronic signals. The dual channel configuration allows simultaneous monitoring and comparison of two signals, enhancing the utility for diverse applications.

The Metravi OM-100 Handheld Oscilloscope is equipped with a clear and vibrant display for visualising waveforms, enabling users to analyse signal characteristics easily. They also come with various measurement functions, trigger options, and data recording capabilities, making them versatile for troubleshooting and diagnostics.

The device offers a handheld design and portability without compromising on performance. The intuitive interface and controls make it user-friendly, catering to both professionals and enthusiasts in the field of electronics. The compact size and dual-channel capability make it suitable for field measurements, making it an ideal tools for field engineers, technicians as well as hobbyists.

• Electronic circuits debugging
• Circuit testing
• Designing & Manufacturing
• Education & Training
• Automobile maintenance & designing

• Dual Channel Four Trace Oscilloscope•Bandwidth: 100MHz•Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997)•It has the function of B delay sweep•High sensitivity: 1mV/DIV
• In ALT (A and B alternately sweeps) mode, four traces are displayed
• Fast sweep rate to 5ns/DIV by magnifying 10
• The function of B TRIG’D can decrease the delay shrinking
• The hold-off function makes it easier to catch the complex triggering signals
• Vertical deflection sensitivity: 5mV/Div to 5V/Div in 1-2- 5 sequence in 10 steps
• Accuracy: ±5%
• Rise Time: 3.5nS
• Maximum Input Voltage : 400V (DC + AC peak)
• Operating Systems: CH1, CH2, ADD, DUAL (CHOP, ALT)
• Trigger mode: AUTO, NORM, TV-V, TV-H
• Trigger signal source: INT, CH2, LINE, EXT
• External trigger input: About 1m.Ohms 25pF impedance
• Z-axis maximum input: 30V (DC+AC peak) voltage
• Bandwidth: DC to 2MHz
• Sweep Mode : A,B, B Triggered, X-Y, ALT
• Sweep time :
  • A: 0.05uS to 0.2S/Div ±5% in 21 calibrated steps (1-2-5 seq)
  • B: 0.05uS to 10uS/Div ±5% in 8 calibrated steps (1-2-5 seq)

  •Delay system : Continuous delay or triggered delay

• Hold-off: Continuous change for 2 times
• X-Y Operation mode : CH1 X-axis and CH2 Y-axis
• Calibration Signal : 0.5V Square wave of 1kHz
• Auxiliary Power Supply : 230V 50Hz AC

• Dual Channel Four Trace Oscilloscope
• Bandwidth: 60MHz
• Confirms to EN61010-1 (1993) and EN-IEC61326-1(1997)
• High Sensitivity: 1mV/Div
• Waveforms are parallax-free with CRT’s internal graticule
• Alt Mag: The waveform (x1) and the x10 magnified waveforms can be displayed simultaneously
• Alt Trig: Stabilized triggering is accomplished with two unrelated signals
• TV Synchronization: Stable TV signals are displayed using new circuitry
• Auto Focus: Focus deviation is automatically corrected
• Vertical Deflection: 5mV/Div to 5V/Div in 1-2-5 sequence in 10 steps for both channels
• Accuracy: ±3%
• Rise Time: 6nS approx.
• Maximum Input Voltage: 400V (DC + AC Peak)
• Input coupling system: AC-GND-DC
• Operation system: CH1, CH2, ADD and DUAL
• Time Base sweep Mode: x1, x5; x1, x5ALT
• Sweep Time: 0.1uS to 0.2S/iv in 20 calibrated steps of 1-2-5 sequence
• Sweep Expansion: 10ns/div to 20ms/div
• Alt Mag Trace: Maximum 4 traces
• Trigger Mode: AUTO, NORM, TV-V, TV-H
• Trigger Signal Source: INT, CH2, LINE, EXT
• X-Y Operation Mode: CH1, X-axis and CH2, Y-axis
• Z-Axis badwidth: DC to 2MHz
• Calibration Signal: 0.5V Square wave of 1kHz
• Auxiliary Power Supply: 230V 50Hz AC

• Dual Trace Dual Channel Oscilloscope with Component Test Facility
• Bandwidth: 30MHz
• Full bandwidth sweeping circuit is used in the sweeping system
• The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
• ALT trigger to observe signals from two irrelative channels
• The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
• From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the Ext frequency counter
• Y deflection operation: Y1, Y2, ALT, CHOP, ADD, mode X-Y
• Vertical Deflection: 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
• Rising time: < 18nS
• Maximum Input Voltage: 400V (DC +ACp-p)
• Triggering Source: Y1, Y2, ALT, POWER, EXT
• Trigger Coupling: AC/DC (EXT), NORM/TV-H, TV-V
• Horizontal Sweep Mode: AUTO, TRIG, LOCK, SINGLE
• Sweep time factor: 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
• Magnification: x10
• X-Y Mode input: X-Axis YI and Y-Axis Y2
• Z Axis minimum input level: TTL Level
• Component Test Facility
• Calibration Signal: Square wave of 0.5V at 1kHz
• CTR Display size: 8cm x 10cm

• Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
• To support plug and play USB storage instrument to communicate with computer.
• Automatic waveform and status setup. Waveform, setup, bitmap storage, waveform and setup reoccurrence.
• Elaborate view window extension function for delicate analysis of waveform details and profile
• Automatic measurement of 28 kinds of waveform parameters
• Automatic cursor tracing and measurement function
• Unique waveform recording and playback functions
• Embedded FFT
• Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
• Edge, video, pulse width and ALT Trigger functions
• Multi-language menu display
• Bandwidth 50MHz
• Sampling Rage: 500MSA/Sec.
• Storage Depth: 25k
• Record Length: Sampling Point of 2 x 521k
• Vertical Deflection: 1mV/div~5V/div

• Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
• To support plug and play USB storage instrument to communicate with computer.
• Automatic waveform and status setup. Waveform, setup, bitmap storage, waveform and setup reoccurrence.
• Elaborate view window extension function for delicate analysis of waveform details and profile
• Automatic measurement of 28 kinds of waveform parameters
• Automatic cursor tracing and measurement function
• Unique waveform recording and playback functions
• Embedded FFT
• Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
• Edge, video, pulse width and ALT Trigger functions
• Multi-language menu display
• Bandwidth 150MHz
• Sampling Rate: 1GSA/Sec.
• Storage Depth: 25k
• Record Length: Sampling Point of 2 x 521k
• Vertical Deflection: 2mV/div~5V/div

• Double Analog Channels High-resolution colorful LCD display with resolution of 400 X 240 (or 800 X 480)
• To support plug and play USB storage instrument to communicate with computer.
• Automatic waveform and status setup. Waveform, setup, bitmap storage, waveform and setup reoccurrence.
• Elaborate view window extension function for delicate analysis of waveform details and profile
• Automatic measurement of 28 kinds of waveform parameters
• Automatic cursor tracing and measurement function
• Unique waveform recording and playback functions
• Embedded FFT
• Multiple mathematical calculation functions (including +, -, X, ÷ ) for waveform
• Edge, video, pulse width and ALT Trigger functions
• Multi-language menu display
• Bandwidth 100MHz
• Sampling Rate: 1GSA/Sec.
• Storage Depth: 25k
• Record Length: Sampling Point of 2 x 521k
• Vertical Deflection: 1mV/div~5V/div

• High Voltage Probe to measure AC/DC High Voltage
• Measures upto 30kV DC and 20kV AC
• Accuracy: ± 1%
• Cable Length 1m

• Dual Trace Dual Channel Oscilloscope
• Bandwidth: 20MHz
• Full bandwidth sweeping circuit is used in the sweeping system
• The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
• ALT trigger to observe signals from two irrelative channels
• The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
• From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the Ext frequency counter
• Y deflection operation: Y1, Y2, ALT, CHOP, ADD, mode X-Y
• Vertical Deflection: 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
• Rising time: < 18nS
• Maximum Input Voltage: 400V (DC +ACp-p)
• Triggering Source: Y1, Y2, ALT, POWER, EXT
• Trigger Coupling: AC/DC (EXT), NORM/TV-H, TV-V
• Horizontal Sweep Mode: AUTO, TRIG, LOCK, SINGLE
• Sweep time factor: 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
• Magnification: x10
• X-Y Mode input: X-Axis YI and Y-Axis Y2
• Z Axis minimum input level: TTL Level
• Calibration Signal: Square wave of 0.5V at 1kHz
• CTR Display size: 8cm x 10cm

• Dual Trace Dual Channel Oscilloscope
• Bandwidth: 30MHz
• Full bandwidth sweeping circuit is used in the sweeping system
• The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
• ALT trigger to observe signals from two irrelative channels
• The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
• From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the Ext frequency counter
• Y deflection operation: Y1, Y2, ALT, CHOP, ADD, mode X-Y
• Vertical Deflection: 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
• Rising time: < 18nS
• Maximum Input Voltage: 400V (DC +ACp-p)
• Triggering Source: Y1, Y2, ALT, POWER, EXT
• Trigger Coupling: AC/DC (EXT), NORM/TV-H, TV-V
• Horizontal Sweep Mode: AUTO, TRIG, LOCK, SINGLE
• Sweep time factor: 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
• Magnification: x10
• X-Y Mode input: X-Axis YI and Y-Axis Y2
• Z Axis minimum input level: TTL Level
• Calibration Signal: Square wave of 0.5V at 1kHz
• CTR Display size: 8cm x 10cm

• Dual Trace Dual Channel Oscilloscope with Component Test Facility
• Bandwidth: 20MHz
• Full bandwidth sweeping circuit is used in the sweeping system
• The flexible and convenient triggering mode has the functions for selecting signals from one channel or triggered by Ext signals
• ALT trigger to observe signals from two irrelative channels
• The instrument has the functions of TV-H / TV-V synchronization and trigger-lock to observe all kinds of signals stably
• From the terminal for trigger input, CH1 and CH2 signals can be output along with the triggering channel to connect the Ext frequency counter
• Y deflection operation: Y1, Y2, ALT, CHOP, ADD, mode X-Y
• Vertical Deflection: 5mV/Div to 20V/Div in factor 1-2-5 sequence in 12 steps
• Rising time: < 18nS
• Maximum Input Voltage: 400V (DC +ACp-p)
• Triggering Source: Y1, Y2, ALT, POWER, EXT
• Trigger Coupling: AC/DC (EXT), NORM/TV-H, TV-V
• Horizontal Sweep Mode: AUTO, TRIG, LOCK, SINGLE
• Sweep time factor: 0.1uS/div to 0.2s/div in 1-2-5 sequence in 20 steps
• Magnification: x10
• X-Y Mode input: X-Axis YI and Y-Axis Y2
• Z Axis minimum input level: TTL Level
• Component Test Facility
• Calibration Signal: Square wave of 0.5V at 1kHz
• CTR Display size: 8cm x 10cm
• Auxiliary Power Supply: 230V 50Hz AC